1), not easy to scratch:
After the quartz stone plate is vacuum-extrusion-squeezed and extruded, the quartz has reached Mohs hardness of 6~7.5 grades.
(Frederich Mohs founded a hardness scale, which is an internationally recognized hardness test method. The highest hardness is 10 and the diamond is 10).
2), extremely high temperature, burning does not hurt:
Cause: Quartz is resistant to high temperatures and the resin is not resistant to high temperatures.
3) The real stone feel:
The reason: because quartz stone contains 93% quartz crystal, it is very similar to the stone's feeling, and quartz stone is a combination of natural stone and artificial acrylic. Therefore, from the perspective of color, etc., it is richer than the real stone color, and it is almost colorless.
4) Strong anti-pollution and hard to penetrate stains;
Reason: Because after dozens of complex surface treatment methods, so the surface structure is extremely tight, the product is fine and non-porous, the water absorption rate is almost zero; general kitchen oil, sauce, tea, juice, coffee, acid, alkali, etc. No material can penetrate, so the stain resistance is extremely strong.
Causes: Because the surface layer and the material inside are equally dense, hairless pores and crevices, combined with a built-in certain antibiotics, so eliminate the breeding of bacteria, safe and clean, direct contact with food and skin, etc., good food hygiene and human health .
6) The surface material has no radiation, and it is a green product;
Reason: Because quartz stone is a natural stone crystal mineral, it is one of the most abundant inorganic materials in the world. Its SiO2 content is more than 99.9%, and it will only harm the human body in the processing process. Strictly controlled within the allowable range (which itself contains a relatively small number of radioactive elements such as heavy metals), its mining, use, processing will not cause adverse effects on the human body and the environment, so there will be no contact with food and human body Negative effects.
7) Stone color is consistent, does not fade, does not change color;
Reasons: Quartzite is mainly made of mineral pigments, so it is consistent with the stone color, it is not under strong sunlight for a long period of local contrast irradiation, it is difficult for the naked eye to observe the color change, in addition, the entire quartz stone is taken during the production process. It is a fully automated control equipment that makes the product's color standard uniform. In the long-term use of daily life in the room, it will not fade due to oxidation, aging, corrosion, and contact with hot materials.
8), high material toughness;
Reason: The product contains high-strength glue and resin components, strong elasticity, it will not have fragile brittle.
9), not easy to break;
Reason: The thickness of the product reaches 20mm. Most of the domestic still use 15mm thickness plates, even the actual thickness of cutting corners is only 13mm, it is easy to break under the influence of external forces. Xinhua Xinlian Quartz Stone has been synchronized with world-renowned brands to control raw materials, processing, and product quality to achieve a cracking coefficient of 0.3%.
10), easy maintenance, once and for all, cost-effective:
Reason: The product has excellent physical and chemical properties, can be cleaned with any detergent, even if any neutral pH agent can be cleaned, easy to use, do not have to worry about maintenance troubles after purchase and Inconvenient, once invested in a permanent use, it is a once and for all. High value-added, although the price is higher on the surface, its material value, processing value, service value, environmental health, ease of use, and aesthetics all have extremely high added value.
1, not easy to scratch
Quartzite has a quartz content as high as 93%, and its surface hardness can be as high as 7 on the Mohs scale. It is larger than the sharps used in the kitchen, such as knife shovels, and will not be scratched by it.
2, no pollution
Quartzite is a dense and non-porous composite material manufactured under vacuum conditions. Its quartz surface has excellent corrosion resistance to acid and alkali in the kitchen. Daily use of liquid substances will not penetrate the interior of the quartz stone. The liquid on the surface can be wiped off with a rag just using clean water or a cleaner such as Jie Liang. If necessary, the retentate on the surface can be scraped off with a blade.
3, use old
The shiny new surface of the quartz stone countertop is more than 30 complicated Huaguang treatment processes. It will not be scratched by the blade, will not be penetrated by liquid substances, and will not cause yellowing and discoloration. The daily cleaning needs only Rinse with fresh water, simple and easy. Even after a long period of continuous use, the surface is as bright as a newly installed countertop, requiring no maintenance and maintenance.
4, can not burn
The natural quartz crystal is a typical refractory material, its melting point is as high as 1300 degrees, and 93% quartz stone made of natural quartz is completely flame-retardant, it will not burn due to contact with high temperature, and it also has high temperature resistance that artificial stone and other countertops cannot match. characteristic.
5, non-toxic radiation
The surface of quartz stone is smooth, smooth and no scratches are retained. The dense and non-porous material structure makes bacteria nowhere to hide and can be in direct contact with food, safe and non-toxic.